What should I pay attention to when running a concrete mixer?

The normal operation of the concrete mixer is what every user wants to see,which requires users to pay attention to the following three aspects when using the mixer:

Release Time:

2020-08-14

The normal operation of the concrete mixer is what every user wants to see,which requires users to pay attention to the following three aspects when using the mixer:
 
1.Before the operation of the mixer:before and after the operation of the concrete mixer,the transmission mechanism,working device,brake,etc.Reliable inspection and tightening should be carried out to ensure normal operation.Protective covers should be installed on the big gear ring,belt pulley and other parts,and no foreign matter should be stuck in the mixing drum,supporting transmission and moving parts,as well as the warehouse door,bucket door and track.
 
Points for attention in the operation of concrete mixer
 
2.The mixer is running:
 
(1)When feeding,it is strictly forbidden to put your head or hands into the hopper and frame,and do not put your hands or tools into the mixing drum during operation.
 
(2)When the hopper rises,it is forbidden to work or walk under the hopper.The bottom of the pit should provide a pillow for the hopper,and the hopper should be fixed with a chain when cleaning the pit.
 
(3)Adding materials to the mixing drum should be carried out during operation;adding new materials can only be carried out after all the original concrete in the mixer is unloaded.Except for reverse discharge,do not stop the mixer midway or start the mixer when the mixer is fully loaded.
 
(4)During operation,if the operation cannot continue due to failure,the power supply should be cut off immediately and the concrete in the mixing drum should be cleaned up.
 
3.After the mixer is running:When the concrete mixing is completed or is expected to stop for more than 1 hour,in addition to discharging the remaining materials,pour stones and water into the vibrating bucket,and turn on the mixer to clean the mortar attached to the bucket.After discharge.There should be no water in the barrel to prevent the barrel and leaves from rusting.At the same time,the dust accumulated outside the mixer should be cleaned up to keep the machine clean and intact.

The requirements of stone machinery for saw blade head

Stone machinery is a widely used equipment in the industry, which is favored by customers. The cutter head is an important part of mechanical sawing and has a huge impact on production. Today we will

2020-10-13

Precautions for the use of large sawing machine

Large sawing machines are energy-efficient stone equipment, which are widely used in the industry. The use of machinery is a very important matter and has a huge impact on production. Today we will ex

2020-10-13

Stone sawing machine manufacturers tell you the rules for the use of stone sawing machines

Stone sawing machine is an indispensable stone machine in stone machinery. The following stone sawing machine manufacturers will introduce you the operating procedures of the stone sawing machine:

2020-10-13